How Do I Make My Samsung Phone 9 Stay on When I'm Reading It
FRP or Factory Reset Protection is a security feature on Android devices. Every bit soon equally you register an Android device with a Google account, FRP is enabled automatically. The purpose of Firmware Reset Protection is to protect your device, data, and information against going into the wrong hands. If you lot take a Samsung Galaxy phone or Tab and you have forgotten its unlock pattern or Pivot, at that place's a manner to featherbed and remove the FRP lock on Samsung devices using Odin by flashing combination file.
When the FRP is enabled on an Android device, and yous perform a data factory reset via the Android Recovery card or some other style, y'all will see the following message upon device reboot.
This device was reset. To keep, sign in with a Google Account that was previously synced on this device.
You'll be asked to enter the registered telephone number or email address in order to unlock your device.
Nonetheless, if you reset your Samsung phone from Settings > General Management > Reset > Factory Data Reset, you'll able to format your device without whatsoever result.
Removing FRP on Samsung with Combination File
Many people remember that they can bypass or remove the FRP lock on Samsung Milky way simply past installing the stock firmware via Odin. I remember doing the same to ready the firmware reset protection on a friend's Galaxy S7 Border. The truth is, you can't remove FRP lock Google account event on Samsung mobiles with a normal firmware flash.
Below, I'll be describing the method to flash combination firmware on Samsung devices to remove the FRP lock.
1. Download Samsung Firmware
Since nosotros will be using a combination of specific firmware binary components, you will need to download the latest Samsung firmware for your Galaxy device. Y'all can grab or get the firmware file for your device model from whatsoever of the sources mentioned beneath.
- Download Samsung Firmware with Frija
- BL+AP+CP+CSC binaries for Odin
- Download Firmware on macOS and Linux with Samloader
2. Create Samsung Combination File
Okay, now that you have downloaded the correct firmware for your Samsung Galaxy phone or Tab, it'south time to create the combination firmware to remove the FRP lock on your Samsung device.
Follow the steps given below to create a combination firmware from the regular firmware files.
- Extract the downloaded Samsung firmware Zilch file. You can utilize a Zip archiver similar WinRar, 7Zip, PowerArchiver, etc. for this purpose.
- Open the extracted folder and you lot'll find five firmware binaries including AP, BL, CP, CSC, and Home_CSC.
- Make sure you tin can view the .md5 extension of the files. If you see just .tar, click on the View tab on the Windows Explorer window and check the pick that says 'File name extensions'.
- Now, right-click on the firmware file that starts with AP in its name and select the rename option and add together a .rar extension after .md5.
- Then select the BL file and change its extension to .rar besides.
- You can at present excerpt the AP and BL zip files.
- Open the AP folder, copy the kicking.img.lz4, and system.img.lz4 files and paste them into a new folder.
- Similarly, open the BL binder and move the file names sboot.img.lz4 to the same new binder.
- Open up the binder where you saved the kicking.img,lz4, sboot.img.lz4, and system.img.lz4 files. Select all three files and pack them into one file by selecting the Compress to "New folder.rar" selection from the Windows context menu.
- At present, change the Zip extension of New folder.rar file to .tar and rename information technology with the firmware proper name as shown below.
You have successfully created the Samsung combination file to remove FRP on your Galaxy device.
3. Reset Samsung Device and Enable USB Debugging
Before you proceed to install the combination file, you need to perform a information factory reset. Since you can't do that via the device settings of your Samsung Galaxy phone or Tab, you need to do that via the Recovery Mode. The method to access the Recovery manner on Samsung devices differs from model to model. You lot can refer to my detailed tutorial on booting into the Samsung Recovery Mode.
- One time you lot become into the Android Recovery menu screen, select the Wipe data/factory reset. Y'all can employ the Volume up/down keys to navigate and the Power button to confirm the selection.
- Perform a data/manufactory reset and so select the Reboot organisation at present pick.
- When your Samsung device boots upwardly, yous'll meet the Samsung factory binary screen similar to the one shown beneath. Tap the mosaic icon on the top-left corner of the screen.
- Doing then will prove y'all the app drawer screen. Navigate to Settings > Developer options and enable USB debugging. If you don't find that option, hither is how you can turn on the Developer selection on Samsung devices.
- Now, turn off your phone or tablet device by holding the Power push.
Flash Samsung Combination File with Odin
Okay, you at present accept the Samsung combination file that y'all created from the stock firmware. You have too enabled USB debugging on your Galaxy device to ensure that Odin can it. You are all set to remove the FRP lock on your Samsung telephone or Tab.
- Download the patched version of Odin and excerpt the Null file on your desktop.
- Odin3 iii.14.1 3B PatcheD (for devices released afterwards 2018)
- Odin3 3.13.3 3B PatcheD (for older Samsung models)
- Download and install the latest Samsung USB Driver on your Windows PC and reboot your organization.
- Open the Odin binder and launch Odin3.exe as an administrator.
- It'south fourth dimension to kicking your Samsung device into the Download Mode.
- Connect your device to the figurer using a compatible USB cablevision.
- When your phone or tablet is recognized by Odin, the ID:COM port will exist highlighted.
- Click the Options tab in Odin and make certain that merely the Car Reboot and F. Reset Fourth dimension options are enabled in that location.
- Then click on the AP push button and add together the Samsung combination file you created earlier.
- Finally, click the Start button to trigger the installation.
- Wait until the combination firmware installation finishes and you are greeted by the Pass!! message in Odin. Your Samsung Galaxy device will reboot automatically.
Merely wait until your device boots upwards and that'south it. You accept successfully removed the FRP lock on your Samsung Galaxy smartphone.
Please get the approval to apply factory binary (PIT)
Sometimes, Samsung'south security feature might block the installation of custom firmware and throw the following mistake on the Download Mode screen of your Samsung Galaxy device.
Please get the blessing to use factory binary (pit)
To ready this, yous tin flash the PIT (Partition Information Table) file for your device forth with the Samsung combination file in Odin. If you don't know how to go the correct PIT file, read my tutorial describing the steps to extract Samsung PIT from firmware.
Delight continue in mind that if yous install the PIT file, you'll have to check the Re-partition option under the Options tab in Odin as well. Moreover, you'll demand to add the PIT file in Odin past clicking the Pit tab in Odin. If the Samsung combination file doesn't help you to remove the FRP lock, yous should also try the NAND Erase method using Odin.
Source: https://technastic.com/remove-frp-samsung-combination-file/
0 Response to "How Do I Make My Samsung Phone 9 Stay on When I'm Reading It"
Post a Comment